|
Features
- Pumps are centrifugal type, providing longevity, quiet operations and minimum maintenance.
- Three phase AC Motors are ignition protected. Single phase AC motors have built-in thermal overload protection. Single phoase pumps P-700 and smaller are ignition protected.
- Pump wetted components are constructed of high quality, non-corrosive materials.
- Most pump heads are easily rotated, allowing porper application, maintaince and service.
- All threaded intake and discharge ports are U.S. strandard taper thread(NPT).
- Each pump is supplied with a vibration isolated mounting bracket, intake and discharge hose fittings and electrical connections.
- All units meet or exceed applicable ABYC and U.S. Coast regulations, CE Directives and genral Air Conditioning and Refrigeration Industry (ARI) standards.
SPECIFICATIONS
| Model (1) |
Volts |
Hz(2) |
Phase |
IP(3) |
Amps |
Pump Head Ft. H2O(5) |
Gallons Per minute |
Capacity(4)
BTU / HR |
Pump-
Connections Intake / Discharge |
Overall Dimension H x W x L |
Net Weight (lbs/kg) |
| PDA-250 |
115 230 |
50/60
50/60 |
1
1 |
Y
Y |
1.5
0.9 |
9 |
3 |
12,000 |
1/2" MPT/
1/4" MPT |
3.75" x 3.75" x 4.75" 9.5cm x 9.5 cm x
12.1 cm |
4.8/2.2 |
| PML-250 |
115 230 |
50/60
50/60 |
1
1 |
Y
Y |
1.1
0.7 |
9 |
3 |
12,000 |
3/4"FPt /
1/4" MPT |
4.25" x 4.74" x 6.25" 10.8cm x 12.1"
x 15.9cm |
4.5/2.0 |
| PDA-500 |
115 230 |
50/60
50/60 |
1
1 |
Y
Y |
2.5
1.3 |
10 |
6 |
24,000 |
3/4" MPT /
1/2" MPT |
4.25" x 4.25" x 6.25"
10.8cm x 10.8 cm x 15.9cm |
8.8/4/0 |
| PML-500 |
115
230
220 |
60
60
50 |
1
1
1 |
Y
Y
Y |
2.0
1.0
0.8 |
12 |
6 |
24,000 |
3/4" FPT /
1/2" MPT |
4.75" x 5.57" x 7.5"
12.1cm x 14.6 cm 19.1 cm |
8.5/3.9 |
| PMA-500 |
115
230
220 |
50/60
50/60
50 |
1
1
1
|
Y
Y
Y |
2.4
1.2
0.9 |
9 |
7.5 |
30,000 |
3.4" FPT /
1/2" MPT |
4.50" x 4.25" x 10.0"
11.4cm x 10.8cm x 25.4cm |
8.2/3.7 |
| PMA-1000 |
115
230 |
50/60
50/60 |
1
1 |
Y
Y |
2.1
1.0 |
13 |
12 |
48,000 |
1" FPT /
1/2"
MPT |
6.25" x 4.5" x 9.0"
15.9cm x 11.4cm x 22.9cm |
8.3/3.7 |
| P-100 |
115
230 |
60
50/60 |
1
1 |
Y
Y |
7.2
3.6 |
13 |
15 |
60,480 |
1 1/4" FPT /
1" FPT |
8.5" x 7.5" x 13.0"
21.6cm x 19.1cm x 33.0cm |
24.5/11.1 |
| P-110 |
230
460 |
50/60
60 |
3
3 |
Y
Y |
2.8
1.4 |
17 |
18 |
72,000 |
1 1/4" FPT/
1" FPT |
8.5" x 7.5" x 13.0"
21.6cm x 19.1cm x 33.0cm |
24.5 / 11.1 |
| P-120 |
115
230 |
60
50/60 |
1
1 |
Y
Y |
4.9
3.5 |
18 |
21 |
84,000 |
1 1/4" FPT/
1" FPT |
8.5" x 7.5" x 13.0"
21.6cm x 19.1cm x 33.0cm |
24.5 / 11.1 |
| P-700 |
115
230
230
460 |
60
50/60
50/60
50/60 |
1
1
3
3 |
Y
Y
Y
Y |
7.2
3.6
2.8
1.4 |
27 |
32 |
129,000 |
1-1/4" FPT /
1" FPT |
8.5" x 7.5" x 13.0"
20.8cm x 19.1cm x 34.3cm |
26.0/11.8
30.0/13.6 |
| P-710 |
115
230
230
460 |
50/60
50/60
50/60
60 |
1
1
3
3
|
N
N
Y
Y |
9.8
4.9
2.2
1.1 |
23 |
40 |
172,800 |
1 1/2" FPT /
1 1/2" FPT |
9.75" x 7.5" x 14.75"
24.8cm x 19.1cm x 37.5cm |
34.0/15.4 |
| P711 |
115
230
230
460 |
50/60
50/60
50/60
60 |
1
1
3
3 |
N
N
Y
Y |
16.0
8.0
4.2
2.1 |
42 |
54 |
216,000 |
1 1/2" FPT /
1 1/2" FPT |
9.75" x 7.5" x 14.75"
24.8cm x 19.1cm x 37.5cm |
37.4 / 16.9 |
| P-800 |
12 |
DC |
- |
N
N |
1 |
7 |
2 |
6,000 |
3/8" FPT /
3/8 OD |
3.75" x 2.81" x 5.13"
9.5cm x 7.1cm x 13.0cm |
1.2/0.5 |
| P-800LL |
12
24
|
DC
DC |
-
- |
N
N |
1.0
0.5 |
7 |
2 |
6,000 |
3/8" FPT /
1/2" HB |
3.0" x 2.75" x 4.5"
7.6cm x 7.0cm x 11.4cm |
1.0/0.5 |
| P-900 |
12
24 |
DC
DC |
-
- |
N
N |
3.8
1.9 |
9 |
3 |
12,000 |
1/2 FPT /
1/2" MPT |
4.5" x 3.5" x 9.0"
11.4cm x 8.9cm x 22.9cm |
4.5/2.0 |
| P-1010 |
12
24
32 |
DC
DC
DC |
-
-
- |
N
N
N |
6.9
3.5
2.6 |
9 |
3 |
12,000 |
3/4" FPT /
1/2" FPT |
3.5" x 4.1" x 8.5"
8.9cm x 10.4cm x 21.6cm |
5.6/2.5 |
NOTE: Contact Taylor Made Environmanetal-FL for pumps larger than P711.
- Add a 'C' to the model number to indicate 230 volts on models 250, 500 and 1000 or add a 'Z' to indicate 230 volts on all other models.
- Capacities given are rated at 60 Hz operation (except for 50Hz only motors). 50 Hz operation reduces 60Hz Gallons Per Minute(GPM) by 17%. And the head
is decreased by 30%.
- Ignition Protected.
- Capacities given are determined using an average of 3 GPM per ton(12,000 BTUs) at given GPM and head. If the capacity of your air conditioning system is greater
than 24,000 BTU/hr, the seawater pump is most likely air cooled and will need occasional oiling. See manufacturer's labeling
on the pump for maintenance instructions.
- Head calculations required for system is dependant on number and size of units(s), length of hose, use of 90° elbows, and the height of the units above the pump.Please
refer to MAS pump sizing aplication guide or consult your MAS application engineer.
|
