 |
Product Description
The Elite ™ Environmental Control Unit
is a microporcessor-based controller designed for
the precise monitoring of marine air conditioning
systems, and is now available in retrofit kits for
both direct expansion and chilled waterapplications.
The Elite Retrofit Kit is used for direct expansion
(DX) A/C units, while the AH-Elite Retrofit Kit
is used for chilled water (CW) air handlers.
All kits utilize the new Passport® I/O circuit
board and either DX or CW software. The control operates
at 115 or 230 volts, each operable as 50 or 60 cycles.
Elite Retrofit Kits have everything necessary
to upgrade existing direct expansion systems. Kits
are avaiable to replace the MCP 3-knob, Passport II,
ECU and ECU-MAxx controls. Specify either self-contained(SC)
or split Centrail System (CS) when ordering.
Each kit contains the Elite display, a Vimar®
Black Poly Rondo bezel, the Passport I/O circuit board
mounted in a electrical box, alternate air sensor
and display cables, wiring harness, operation manual,
quick reference card and mounting plate. Specify either
a horizontal or vertical mounting plate when replacing
an ECU or a 3-knob mechanical control (see illustration).
The AH-Elite Retrofit Kit is used to replace
an existing AH-Passport digital display. This kit
includes the Elite display, a Vimar Black Poly Rondo
bezel, the AH-Passport I/O circuit board mounted in
an electrical box, operation manual, quick reference
card and mounting plate.
The entire assembly is grounded and protected against
static interferance and RF noise. The circuit board
is conformally coated to provide component and board
protection. Non-volatile memory stores all user-selectable
parameters indefinitely during operation or any power
failure situation.
The Elite Environmaental Control meets or exceeds
applicable ABYC, U.S. Coast Guard Regulations and
CE Directives. Please see the Elite specifications
sheet L-2237 for more details.
Features
- Automatic humidity control - moiture level can be controlled when boat is unattended.
- Cool only, heat only, dehumidify or automatic mode selection.
- Temperature displayed in Farenheit or Celsius.
- Multiple fan speed selections - automatic or three manual speeds.
- Cycle fan compressor or continous fan operation.
- Compressor time delay staging for multiple unit applications.
- Calibration of fan speed settings and temperatures display to maintain precise control.
- Blank display lights when desired.
- Controls shaded pole and split capacitor fan motors.
- Programmable de-icing cycle.
- New "Pump Sentry" protects system if seawater pumps fails, (sensor cable ordered seperately).
Design Features
- Low voltage for optimum safety.
- Built-in air sensor, and remote air sensor also included.
- Universal sysmbols on backlit switches provide international recogniton.
- Cabin temperature is continously displayed.
Installation
- Caircuit board and 15' display cable are factory installed in the electrical box.
- Mounting plate with Elite display replaces 3-knob mechanical control panel.
- Easy connections using phone-type modular jacks which are shielded and grounded.
- Polarised plug for easy connection to existing self-contained A/C unit.
SPECIFICATIONS
| Model (1) |
RETRO SC / CS / AH - ELITE HRZ / VRT |
| Dimensions
in(cm) |
| Display Panel |
4.41(11.2)W x 2.96(7.5)H
x 1.08(2.7)D |
| Bezel Size(2) |
4.85(12.3)W x 3.25(8.3)H |
| Mounting Plate |
See drawing above for MCP 3 knob kits. |
| |
| Cables
Included(3) |
| Diplay ft(m) |
VCD:15(4.6) CMCD: 10(3.0) CSD: 30(9.1) Chilled
Water: 15(4.6) |
| |
| Other Cables Avaiable(3) |
Most Cables Available in 5' Increments |
| Display ft(m) |
10' - 75'(3.0 - 22.9) |
| Alternate /Remote Air (optional)(4) |
7'- 60'(2.1 - 18.3) |
| Outside Air Sensor (optional) |
7' - 50' (2.1 - 15.2) |
| Pump Sentry (optional - DX) |
7'- 60'(2.1 - 18.3) |
| Water Inlet Sensor (AH-Elite) |
7'- 60'(2.1 - 18.3) |
- For model number, specify SC for Self-Contained, CS for central system, or AH for a chilled water air handler.
Specify HRZ for horizontal or VRT for vertical when replacing MCP 3-knb or ECU controls only.
- Retrofit kits include a Black Poly Rondo type bezel (335441). Other Ideal type
bezels from Vimar are available in Rondo or Classica styles ans are sold seperately. Dimensions may vary
slightly depending on style.
- Maximum length for display and air sensor cables is 75'. Maximum length for
water inlet sensor cable is 75'.
- Air sensor cables longer than 7' require a remote sensor card.
|
