 |
Product Description
Central System Condensing Units are
available in capacities ranging 6,000 to 16,000 BTUs,
in both reverse cycle and cool only. Each model is
available for 115 volt or 230 volt operation, at both
50 cycles and 60 cycles. For larger capacities, see
the Multi Ton condensing unit.
High efficiency compressors are incorporated are provide
significant reductions in amperage draw. Each unit
is hermetically sealed. Pressure switches and thermal
overloads afford system protection.
Condener coils are construted of spiral, fluted cupronickel
enclosedin a copper shell to provide high corrosion
resistance for continual seawater flow. All surface
components are constructed of, or coated with, materials
resistant to fire and corrosion.
Central System Condensing Units can be installed
in any convinient location and are unaffected by vibration,
moisture or ambient temperatures up to 140°F.
Features
Symmetrical Base Design
- Provides optimum space efficiency with 13.13" square footprint.
- Allows ease in handling and installation.
Electrical Box
- Moisture resistant design.
- Internal components are fully serviceable.
Internal Drain Pan
- Allows for condensation removal.
- Provides for internal fastening of unit.
- Seam welded construction promotes structural integrity.
- Two sets of vibration isolators reduce vibration and ensure quite operation.
Quality Assurance
- Each unit is pre-charged, test run in all operating models and leak checked.
- Charge Guard ® preotection provides sealed access ports ensuring environmetal protection ans system integrity.
- All units meet or exceed applicable ABYC and U.S. Coast Guard regulations. CE Directives and general Air Conditioning and Refrigeration
Industry (ARI) standards.
SPECIFICATIONS
| Model |
CS*6K |
CS*9K |
CS*12K |
CS*16K |
| Capacity
(BTU/H)(1) (2) |
6,000 |
9,000 |
12,000 |
16,000 |
| Electrical Data(2)
|
|
| Voltage(VAC) |
115
|
230 |
115 |
230 |
115 |
230 |
115 |
230 |
| Full Load Amps (FLA)
cool |
7.0 |
3.7 |
6.4 |
3.2 |
8.4 |
4.4 |
12.2 |
5.7 |
| Full Load Amps (FLA)
heat |
7.7 |
4.0 |
7.2 |
3.6 |
9.2 |
5.0 |
13.5 |
6.8 |
| Locked Rotor Amps |
34 |
20 |
40 |
20 |
50 |
31 |
75 |
36 |
| K.V.A. (Kilo-Volt-Amps)
|
0.9 |
0.9 |
0.8 |
0.8 |
1.1 |
1.2 |
1.6 |
1.5 |
| Max. Circuit Breaker
(Amps) |
20 |
10 |
20 |
10 |
30 |
15 |
40 |
20 |
| Min. Circuit Ampacity
(Amps) |
13 |
8 |
13 |
7 |
17 |
10 |
25 |
12 |
| |
| Physical
Data: |
| Unit Dimensions (3)
|
13.13"/33.34cm
W x 13.13" / 33.34cm D x 15.50" / 39.4cm
H |
| Water Inlet / Outlet |
5/8"
/ 1.59 cm O.D. |
| Base Condensation
Drain |
5/8"
/ 1.59 cm O.D. |
| Base Valves (discharge
x suction) |
1/4"
x 3/8" |
1/4"
x 3/8" |
1/4"
x 3/8" |
1/4"
x 1/2" |
| Refrigerant R-22 (oz/kg) |
20/0.57 |
21/0.60 |
24/0.68 |
24/0.68 |
| Weight
(lbs/kg) |
| Net |
56/25.5 |
64/29.1 |
66/30.0 |
66/30.0 |
| Ship |
63/28.6 |
74/33.6 |
75/34.0 |
75/34.0 |
-
Ratings at 60 Hz operation
will be diminished by 17%. Fully rated 50 Hz equipment
is available for 220/240 VAC operation.
- 60 Hz data given. BTU and electrical
data based on a 45° evaporator and 100°F condenser
in cool mode, and a 45°F evaporator and 130°F
condenser in heat mode.
- Unit Height is 12.6"/32.0 cm without
electrical box. 'C' at the wnd of model number
denotes cool only. Example CSP9KC
'Z' at the end of the model number denotes 230V. Example: CSP6KZ
* P = Passport II Control (CSP) M = Manual Control (CSM)
|
