|
Feaures
True Eutetic Solution
- Specially formulated mixture of water, salts and inhibitors.
- Provides stable box temperaturs throughout holdover period.
- Injected into plates under a vacuum (30 microns).
- Four temperature ranges available: 0°F (-18 °C),
-9°F(-23 °C) and -18°F (-28°C) for freezer applications and 26°F(-3 °C) for refrigeration applications.
Unique Stainless Steel Construction
- Hand poilished #304 stainless steel (0.062) for clean, aesthetic appearance.
- Easy mount flange system on short side of all plates.
- Internally gussetted steel tubing imroves thermal transfer and is high pressure tested to 550 psi.
- Hand welded seams by certified TIG welders.
- Wide variety of sizes and ranges to accommodate various box designs.
Dual Circuit Design
- Permits paralleled operation for engine drive and AC or DC voltage condensing units for redundancy.
- Retrofir crossover assembly for easy conversion to single unit.
- Rapid "pull down" of plate temperature when run with a double pass on one condensing unit.
- Dual set of thermostat sensing wells for accurate temperature control.
Specifications
| Plate Selection(1) |
12 x 10 |
16 x 10 |
20 x8 |
20 x 10 |
16 x 14 |
24 x 10 |
24 x 13 |
| Dimensions(in/cm)(2) |
| H1(Height) |
10.0/25.4 |
14.0/35.6 |
18.0/45.7 |
18.0/45.7 |
14.0/35.6 |
22.0/55.9 |
22.0/55.9 |
| H2(Height)(3) |
11.5 / 29.2 |
15.5/39.4 |
19.5/49.5 |
15.5/39.4 |
23.5/59.7 |
23.5/59.7 |
23.5/59.7 |
| W (Width) |
10.0/25.4 |
10.0/25.4 |
80/20.3 |
10.0/35.6 |
14.0/35.6 |
10.0/25.4 |
13.0/33.0 |
| D(Depth) |
26°F
and 0°F plates = 3.0/7.6 -9°F
and -18°F plates = 3.38/8.6 |
| Capacity
(BTUs) |
| Refrigerator(26°F/-3°C) |
1243 |
1708 |
1980 |
2174 |
2356 |
2653 |
3469 |
| Freezer (0°F / -18°C) |
1117 |
1536 |
1780 |
1955 |
2118 |
2385 |
3118 |
| Freezer(-18°F/-28°C) |
1023 |
1438 |
1480 |
1851 |
2025 |
2265 |
2984 |
| Freezer (-18°F/-28°C) |
1058 |
1486 |
1531 |
1914 |
2095 |
2342 |
3086 |
| |
| Weight(lb /kg) |
19.0/8.6 |
26.0/11.8 |
28.0/12.7 |
33.0/15.5 |
34.0/15.5 |
35.0/15.9 |
54.0/24.5 |
| Refrigerant Connections(4) |
1/2"
O.D. x 3/4" L - S.S. Stubs |
- Plates can be mounted in either horizontal or vertical configurations, with connections either at right, left, up or down. Refrigerant line connections are always located on short dimension of plate.
- Custom plate sizes on request.
- Dimensions includes two 3/4" (1.9cm) flanges with 1/4"(6.35mm) diameter mounting holes.
- All plated can be prefabricated to customer's requirements, including copper stubs, flare connections and fittings, crossover assemblies and Swagelock™ fittings.
|
