PRODUCT DESCRIPTION The Caribbean models of Grunert refrigeration are designed for those yatchs that utilize the power available from their main engine. Typically, all on board energy requirements are condensed into in one or two engine run times per 24 hour period.

These units come standard with a PVC and stainless steel raw water condenser for improved efficiency and lower operating pressure(unlike other Grunert system for optimum flexibity for those times when you want to maintain box temperatures and the boat is unattended (or the vessel is hauled). For design assistance, contact your local Dealer or the Customer Support Team at Marine Air Systems.

The compressor components for this system must beinstalled near or on the main engine with all necessary components nearby.

Caribbean units meet or exceed applicable U.S. Coast Guard regulations, CE Directives and general Air Conditioning and Refrigeration Industry (ARI) standards. Features

• Components can be remote mounted.
• Receiver, drier, pressure switch and valves are on one convenient pallet.

• Rebuildable copressor, including valve plates and shaft seals, for long life.

• Enclosed box protects components and provided for convenient connections.
• Low voltage (12 volts) controls provide an extra margin of safety.

• All systems have base valves with service ports for evacuation and leak checking the system and a receiver for refrigerant storage.
• Utilizes refrigerant 409A.

• Each unit is assembled with a charge of nitrogen to ensure that scale does not form during soldering.
• Every unit is leak checked, test run abd shipped recharged with refrigerant.
• Charge Guard® protection provides sealed access ports to ensure system integrity during handling and installation.

1. BTU/H ratings are the average rate of extraction from hold over plates and are not the capacity of the compressor or condensing unit. These figures are to be used to determine run times required to maintain box design temperatures.